Deep Master blades Sandwich (swap "J")

Description

Carbon Blades "Deep Master” (type "J")

Blades are suitable for a complete set by galoshes: Mares, BS Diver etc.
Technical specifications:
Material – fiberglass + high-strength carbon.
Overall dimensions:
•      full length – 760 mm.;
•      Working length to butt – 610 mm;
•      width 195 mm.
Butt angle (in degrees): 24.

The weight of one blade with flanged edge (depending on hardness)     - from 260 g until 300 g
Hardness: All standard and customized.

 Check the availability of blades hardness at the shop administration by contact phone numbers.

 


More information about flippers

Deep Master manufactures blades for the flippers from high-strength carbon fiber and binding hot curing.

Manufacturing technology: autoclave formation during the high pressure and temperature. This technology provides to blades the highest rates of strength and low hygroscopy.

The vacuum and autoclave technology used during the blades production allows to manufacture the flippers from carbon without risk of micro bubbles formation and requires less resin (it reduces the weight of the detail keeping the strength). The small weight and capacity of flippers make them the best product among the existing flippers in the market for spearfishing.

These flippers were developed and improved for the conditions of professional spearfishing from year to year. Without losing the capabilities in vertical work at deep diving, they allow to make fast maneuvers and accelerations. The carbonic blade of variable thickness allows to increase the working efficiency and to save the energy during deep immersions. These flippers are the good choice for professionals and athletes. The flippers provide explosive speed at start from the place, and also if necessary support it for a long time in such operating mode.
Our flippers from carbon assume a possibility of hardness professional selection:

It allows the underwater hunter depending on proficiency, physical standards and various conditions of hunting to choose the most suitable him flippers.
One of the most important indicators at the choice of flippers for spearfishing is optimal hardness for each blade and ease of galoshes use. Taking into account that the operation of the blade changes its work characteristics depending on into what galosh it is inserted, Deep Master (together with production of plates for galoshes of other manufacturers) has developed own galoshes which are most effectively combined with work plates.
The blades have a flat surface with angle 24 ° or 15 ° in root (depending on preferences of the swimmer), optimizing the position of an ankle joint during the swimming on a surface and deep diving therefore the loads on the joints, sheaves and muscles of legs much more decrease.

Caring for flippers
It is necessary to remember that during the swimming in flippers the swimmer practically doesn't reach limits of their strength, but too careless handling can lead to violation of integrity of a carbon fiber plate, for example, blows or out-of-limit deformation.
It is not necessary to wash out Deep Master flippers with fresh water after each sea diving, but it is desirable to make it before a sustained interruption in operation.
It’s recommended not to leave the flippers as well as any other equipment for spearfishing, for a long time under direct sunshine, in close proximity to heating devices, avoid deformation during the transportation and storage.
 
Guarantee
Guarantee: 1 year (replacement in case of manufacturing defect).